Rubber conveyor belt is generally composed of several layers. If the surface is damaged, the conveyor belt will be discarded at will, which will cause waste of resources. Under normal circumstances, the conveyor belt maintained by the operator on site will form a new layer after pressing, but the operation of the conveyor equipment will waste more time, so the on-site rapid repair of the conveyor belt becomes a problem to be solved. Here's how to quickly repair the conveyor belt on site.

輸送帶制造商之所以能夠?qū)崿F(xiàn)這一目標，是基于一種名為重型輸送帶前端的科學加工工具，它主要包括傳動、受損層的切割和切割機的出砂面。該工具還包括電動機和電氣控制箱，電動機驅動由電氣控制箱控制。

The conveyor belt manufacturer is able to achieve this goal based on a scientific processing tool called the front end of heavy conveyor belt, which mainly includes transmission, cutting of damaged layer and sanding surface of cutting machine. The tool also includes a motor and an electrical control box, and the motor drive is controlled by the electrical control box.

發射機的主要結構為:設備輸出輥、轉移輥輸送線,在輸出輥上卷好修復的傳送帶,依靠旋轉輸出向前運行,輸出輥的底部是切削結構損傷層,通過輥輥和上輥切刀在一起,兩個之間的距離可以基于傳送帶的厚度做出相應的調整,通過傳送帶輥之間的間隙和切刀,刀口將損傷層刪除,通常有一個明確的輸送線結構,接近頂部的傳動輥安裝可以電動快速旋轉輥,表面是配備清潔刷,可以快速波蘭的切削表面受損的傳送帶。

The main structure of the transmitter is: equipment output roller and transfer roller conveyor line, roll the repaired conveyor belt on the output roller, run forward by rotating output, and the bottom of the output roller is the cutting structure damage layer. The distance between the two can be adjusted based on the thickness of the conveyor belt through the gap between the roller and the cutter, and the knife edge will be damaged Layer removal, usually with a clear conveyor line structure, near the top of the drive roller installation can be electric fast rotation roller, the surface is equipped with a cleaning brush, can quickly polish the cutting surface of the damaged conveyor belt.