In the assembly line production of many enterprises, the conveyor belt is used for operation, so in the process of using the conveyor belt, it is necessary to do a good job in relevant maintenance work, carry out regular maintenance, and deal with problems in a timely manner. So how to solve the problem of ditch edge in the use process? Now we have a detailed understanding of Huayue conveyor belt manufacturers.

當輸送帶出現邊溝的問題時，我們應該從根本上找原因，出現這種問題的原因主要有兩個，一是配方，二是工藝。

When the problem of side ditch occurs in the conveyor belt, we should find the root cause. There are two main reasons for this problem, one is the formula, the other is the process.

1、輸送地配方問題

1. Formula problem in the delivery area

是指邊膠的配方，其流動性欠佳，與貼膠及蓋膠不能達到共硫化;再說工藝;是指輸送帶帶坯成型工藝，帶坯側面不整齊，上邊膠工藝沒有按要求做，邊膠與帶坯之間有空隙，導致出現如上問題。

It refers to the formula of side glue, which has poor fluidity and can't achieve co vulcanization with gluing and covering glue; besides, it refers to the molding process of conveyor belt blank, the side of belt blank is not neat, the upper side glue process is not done as required, and there is a gap between side glue and belt blank, resulting in the above problems.

2、輸送帶硫化工藝

2. Vulcanization process of conveyor belt

如果以上兩方面沒有問題，在硫化過程中，成槽寬度及壓縮比掌握(熟知并能運用)不適宜也會出現邊部邊溝及邊膠脫空的現象。

If there is no problem in the above two aspects, in the process of vulcanization, it is not suitable to master the groove width and compression ratio (well-known and can be used), and the phenomenon of edge groove and edge rubber void will also occur.

3、輸送帶邊膠問題

3. Side glue problem of conveyor belt

①邊膠沒有上好再加上壓縮比過小，缺料造成。

① The edge glue is not good and the compression ratio is too small, resulting in material shortage.

②邊膠沒有上好后造成硅油滲入形成分離界面。

② After the edge glue is not well applied, the silicone oil infiltrates to form the separation interface.

以上是輸送帶在使用過程中出現邊溝問題時的解決問題，希望通過本文內容介紹對您有所幫助。更多關于輸送帶的資訊請關注我們網站繼續了解。如果您想要購買輸送帶產品，歡迎致電與我們聯系，我們將為您提供的產品和服務。

The above is the solution to the problem of side ditch in the use of conveyor belt. I hope this article can help you. For more information about conveyor belt, please follow our website to learn more. If you want to buy conveyor belt products, please call us, we will provide you with quality products and services.