First of all, we analyze why the feed port and the conveyor belt form friction. The first reason is to prevent the materials from spilling, and the two must be in close contact. Secondly, sometimes the impurities in the materials are stuck in the feed port, causing wear and damage to the belt. Thirdly, when the materials fall on the belt, they will have a strong impact on the belt, causing wear to the belt.

斗式提升機輸送帶廠家分析出原因之后，我們就需要針對性的解決這些問題，通過合理的給料口的結構設計來達到降低皮帶與給料口磨損的目的：

After the bucket elevator conveyor belt manufacturers analyze the causes, we need to solve these problems, through the reasonable structure design of the feeding port to achieve the purpose of reducing the belt and feeding port wear

物料與鋼絲繩輸送帶之間的高度差盡量縮小，降低物料下落產生的動能，減少因物料動能造成的磨損

First of all, the height difference between the material and the wire rope conveyor belt should be minimized to reduce the kinetic energy generated by the falling of the material and the wear caused by the kinetic energy of the material

其次保持物料與皮帶同方向，物料掉落時與皮帶保持同向同速，減少摩擦

Secondly, keep the material in the same direction with the belt, and keep the same direction and speed with the belt when the material falls, so as to reduce the friction

第三、加裝溜槽或者導料槽，使物料能夠均勻的灑落在皮帶的

Third, the installation of chute or chute, so that materials can be evenly scattered in the center of the belt

第四、加裝條篩，使得細物料能夠先落在皮帶表面，為粗物料做緩沖，從而達到降低摩擦的作用，減少磨損

Fourth, the installation of screen, so that the fine material can first fall on the surface of the belt, to buffer the coarse material, so as to reduce friction and wear

第五、保持加料段方向水平，更好能夠加裝緩沖托輥，從而大大降低物料對皮帶的沖擊作用。

Fifth, to keep the direction of the feeding section horizontal, it is better to install buffer idler, so as to greatly reduce the impact of materials on the belt.

通過斗式提升機輸送帶廠家的講解，以上方法都可以起到很好的降低鋼絲繩輸送帶和給料口磨損的作用，當然完全的防止磨損是不現實的，適當?shù)慕档湍p就能同時增加使用壽命，大大提升收益程度。

Through the explanation of the bucket elevator conveyor belt manufacturer, the above methods can play a very good role in reducing the wear of the steel wire rope conveyor belt and the feeding port. Of course, it is unrealistic to completely prevent the wear. Properly reducing the wear can increase the service life and greatly improve the income.

本文由山東輸送帶生產廠家為您提供，我們的網站是：http://ujkdbkh.cn 將以全心全意的熱情為您提供服務，歡迎您的訪問！

This article is provided by Shandong conveyor belt manufacturer http://ujkdbkh.cn  We will serve you wholeheartedly and warmly. Welcome to visit!