Rubber conveyor belt is mainly made of rubber. According to different types and functions of rubber, it can be divided into different types of conveyor belt, such as wear resistance, heat resistance, cold resistance and alkali resistance. Different industries will encounter different problems in the process of using rubber conveyor belt, but most of them will encounter the phenomenon of pleating. How to deal with this situation? The following has a detailed understanding of conveyor belt manufacturers.

　　橡膠輸送帶的帶體有時會出現彎曲和拆卸現象，嚴重影響輸送帶的性能，不利于生產。原因如下:鋼坯兩側的厚度不同，較厚的一側容易拉伸，且長度不一致，會造成彎曲。帶芯的帶鋼不合理，膠帶兩邊的匹配不一致，導致其張力與相同，彈性也不同，這必然會使輸送帶彎曲打折。張力器夾持角度控制不好。當它與主機不直時，很容易拉動斜帶毛坯，形成彎曲折彎的形狀。

　　Sometimes the rubber conveyor belt body will be bent and disassembled, which seriously affects the performance of the conveyor belt and is not conducive to safety production. The reasons are as follows: the thickness of the two sides of the billet is different, the thicker side is easy to stretch, and the length is not the same, which will cause bending. The belt with core is unreasonable, and the matching of both sides of the belt is not consistent, resulting in the same tension and different elasticity, which will inevitably make the conveyor belt bend and discount. The holding angle of the tensioner is not well controlled. When it is not straight with the host machine, it is easy to pull the inclined belt blank to form a bending shape.

　　橡膠傳送帶向前運行支持和牽引FQ,支持和旋轉力Fz和橫向力FC牽引分解,輥的軸向移動的橫向分量,輥支撐固定輥不是軸向運動,它將不可避免地產生一個反作用力財政年度傳送帶,它使傳送帶移動到另一邊,導致偏差。很明顯，托輥組安裝過程中的撓度力是造成橡膠輸送帶偏差的原因，調節方法也很明確。

　　The rubber conveyor belt moves forward to support and pull FQ, support and rotation force FZ and transverse force FC to pull and decompose, the transverse component of the axial movement of the roller, the fixed roller of the roller support is not axial movement, it will inevitably produce a reaction force fiscal year conveyor belt, it makes the conveyor belt move to the other side, leading to deviation. It is obvious that the deflection force during the installation of the idler group is the cause of the rubber conveyor belt deviation, and the adjustment method is also very clear.

　　以上是橡膠輸送帶在使用中出現的打褶現象的原因及解決方法，希望對您有所幫助。有關橡膠輸送帶的更多信息，請關注我們的網站以了解更多。

　　The above is the reason and solution of the pleating phenomenon in the use of rubber conveyor belt. I hope it can help you. For more information about rubber conveyor belts, please follow our website to learn more.