The conveyor belt is in friction with each part of the conveyor during the whole process of the application. The friction is within the normal range to ensure the use of the conveyor belt. However, if the friction between the conveyor belt and other parts increases, it will cause damage to the conveyor belt, which will lead to early scrapping of the conveyor belt for a long time, and the use period is not high. Will the conveyor belt produce friction with these parts in the whole operation process? The following is an in-depth analysis of the belt conveyor manufacturers.

　　1. 聲卡架與傳送帶之間的摩擦。有時，由于輸送帶在生產、安裝和使用中存在的缺陷，輸送帶會偏離方向。

　　1. Friction between sound card rack and conveyor belt. Sometimes, because of the defects in the production, installation and use of the conveyor belt, the conveyor belt will deviate from the direction.

　　2. 通道分離器與輸送帶之間的摩擦。分離器對輸送帶的損壞就是這樣一種獨特的損壞。

　　2. Friction between channel separator and conveyor belt. The damage of separator to conveyor belt is such a unique damage.

　　3.緩沖托輥之間的摩擦和傳送帶,傳送帶的下蓋膠也深受定心緩沖托輥的摩擦力和遠期擴展槽空轉,這通常是在槽之間的連接部分受損惰輥和突出的輸送機的一部分。

　　3. The friction between the buffer idlers and the conveyor belt, the lower cover rubber of the conveyor belt are also deeply affected by the friction of the centering buffer idlers and the idling of the long-term expansion slot, which is usually a part of the damaged idler roller and the protruding conveyor in the connecting part between the slots.

　　4、清潔工和傳送帶摩擦,清潔工造成損害的傳送帶是對稱的,但隨著硬厚鋼板作為一個干凈的盤子,如果使用不當,也會除了浪費硫化橡膠鉆出來,當清潔工,指出,傳送帶之間的土將傳送帶長度上深深的傷痕。

　　4. When the cleaner rubs against the conveyor belt, the conveyor belt damaged by the cleaner is symmetrical, but with the hard steel plate as a clean plate, if it is not used properly, it will also waste vulcanized rubber to drill out. When the cleaner points out that the soil between the conveyor belts will cause deep scars on the length of the conveyor belt.

　　以上是輸送帶在整個運行過程中產生摩擦的關鍵位置。希望您能根據本文的詳細介紹有一定的把握。在應用中，需要保證輸送帶與各個位置之間的摩擦滿足要求，從而保證輸送帶的工作效率和使用壽命，從而降低公司的產品成本。請關注我們的網站，以獲取更多關于傳送帶的信息。

　　The above is the key position of friction in the whole operation process of conveyor belt. I hope you can have some assurance according to the detailed introduction of this article. In the application, it is necessary to ensure that the friction between the conveyor belt and each position meets the requirements, so as to ensure the working efficiency and service life of the conveyor belt, so as to reduce the product cost of the company. Please follow our website for more information about the conveyor belt.