1. When cleaning the rubber conveyor belt, first turn off the steam valve and adjust the pressure according to the position of the tensioning device.

2、對機電設備，用塑料包起來。

2. For mechanical and electrical equipment, it should be wrapped in plastic.

3、將橡膠輸送帶連接，把清洗機接220v交流電。

3. Connect the rubber conveyor belt and connect the cleaning machine to 220 V AC.

4、對橡膠輸送帶進行浸濕。

4. Wet the rubber conveyor belt.

5、將清洗溶液與水的比例以1:10融合，攪拌均勻。

5. Mix the cleaning solution and water in the ratio of 1:10 and stir evenly.

6、用沖槍將清洗溶液均勻的噴灑在大帶上，注意大帶的加強邊，不要用用過大的沖力，以免傷害大帶，沖槍要一次性掃過，不要重復沖洗。

6. Spray the cleaning solution evenly on the belt with the flushing gun. Pay attention to the reinforcing edge of the belt. Do not use too much impulse to avoid damaging the belt. The flushing gun should be swept once and do not wash repeatedly.

7、用清水沖洗，這個時候要仔細，因為一般橡膠輸送帶很難清洗干凈，所以大家得格外注意，認真清洗，再把它烘干。

7. Wash with clean water, this time to be careful, because the general rubber conveyor belt is difficult to clean, so we have to pay special attention to, carefully clean, and then dry it.

以上的精彩內容來自：山東輸送帶批發詳細的內容請點擊進入我們的網站進行查詢對接：http://ujkdbkh.cn

The above wonderful content comes from: Shandong conveyor belt wholesale. For details, please click to enter our website for query and docking: http://ujkdbkh.cn