1、給料方向應順膠帶的運轉方向，為減小物料下落時對膠帶的沖擊應采溜槽，減小物料下落間隔;膠帶受料段應縮短托輥間距和采用緩沖托輥為漏料，帶順應采用柔軟適度的擋料板，以免檔料板過硬，刮破保送帶的帶面。
1. The feeding direction should follow the running direction of the belt. In order to reduce the impact on the belt when the material falls, chute should be adopted to reduce the falling interval of the material. The feeding section of the belt should shorten the distance between the idlers and adopt the buffer idler as the leaking material, and the belt should be complied with the use of soft and moderate baffle, so as not to make the baffle too hard and scrape the belt surface.
2、不同類型、規格層數的保送帶不宜接在一同運用，其接頭采用膠接法。
2. Different types and layers of belts are not suitable to be joined together, and their joints are bonded by gluing method.
3、保送膠帶運轉速度普通不宜大于2.5米/秒，塊度大，磨損性大的物料和運用固定梨的卸料安裝應盡量采用低速。
3. The running speed of the belts should not be more than 2.5 m/s. The materials with large fragmentation and abrasion and the unloading and installation of fixed pears should adopt low speed as far as possible.
4、保送帶在運用中應留意以下事項：①防止托輥被物料掩蓋，形成回轉不靈，避免漏料卡于滾筒與膠帶之間，留意活動局部的光滑，但不得油污保送膠帶;②防止帶負荷啟動;③膠帶發作跑偏，應用時采取措施糾正;④發現膠帶部分損人造棉應用時修補，以免擴展;
4. The following points should be noticed in the operation of the belt: 1. Prevent the rollers from being covered up by the materials, form malrotation, avoid leakage from sticking between the drum and the belt, pay attention to the smoothness of the moving parts, but do not get greasy belt; 2. Prevent the start-up of the belt load; 3. Take measures to correct the deviation of the belt when it is applied; 4. Repair the damaged part of the belt when it is used, so as to avoid expansion;
5、保送機的傳動滾筒直徑與保送帶布層的關系、傳動滾筒、改向滾筒的配套以及對托輥槽角的請求應依據運輸機的設計規則，合理選取。
5. The relationship between the diameter of the driving drum and the layers of the belt, the matching of the driving drum and the reversing drum, and the request for the groove angle of the idler should be reasonably selected according to the design rules of the conveyor.
6、保送膠帶的類型、構造、規格、層數應依據運用條件合理選用。
6. The type, structure, specifications and layers of the belts should be selected reasonably according to the operating conditions.
The above wonderful content includes food-grade conveyor belt http://ujkdbkh.cn to provide technical support, our website will continue to present you a lot of fresh information, please remember to pay attention to us!
聯系微信
